Min
skummer suger luft ind ude fra. Og jeg tror det gør (har skrevet om det i
kalkreaktor tråden) at der i indsugning på skummeren dannes noget hvidt hårdt noget som kan lukke hele hullet til i løbet af en uge. Erik her på siden gav mig så det tip at jeg skulle slukke for skummeren en times tid hver dag, det skulle forhindre det. Dennis gav mig også tippet med det var i forbindelse med tilsætning af AF produkter om aftenen.
Nu har jeg endelig fået det gjort korrekt via min GHL. Hvis nogen vil prøve det kommer lige guide til det her
You can set this up by using the Feed Pause feature.
1. Go to the Feed pause settings page and select an unused FP
2. Specify how long this FP should run for...in this case 60 minutes
3. Select the Timer number that will be responsible for activating this FP, then SAVE settings
4. Go to the selected timer function, press the Switch mode tab and set it to Event start
5. Press the Schedule tab and set this "Event" to begin at 22:00, then specify the days to run this schedule, then press SAVE settings
6. Go the Switch channels settings page, select the outlet that has the skimmer connected to it
7. Set the function to Filter and select the feed pause number you chose in step 1, then SAVE settings